• April 22, 2023

Automatic cap opening machine, also known as intelligent cap uncapping machine, automatic cap uncapping instrument, sample cap uncapping instrument, its working principle is mainly the disease collection sample tube and sample tube, the opening and closing of the external sensor to determine the position of the sampling tube in real time At the same time, an instruction message for opening and clo...

• April 13, 2023

1, realizes the automatic grinding, polishing and cleaning of the weld, completely liberates the artificial —— in the processing program, intelligent software system, hardware system, can fully realize the automatic grinding and polishing of the weld, without manual assistance. 2, ultra high flexible, highly flexible, greatly improve the weld grinding efficiency —— can replace at least 10 workers,...

• April 11, 2023

Features of the tap flow testing machine 1: It has the function of cold water and hot water, the hot water temperature is 90℃, and the cold water is room temperature tap water; 2: Static pressure test using tap water test; 3: the flow rate and static pressure test pressure can be adjusted and controllable; 4: Heating the water temperature is equipped with an insulation layer, which can be heated f...

• March 30, 2023

1. Scope of application The faucet test machine and water nozzle test machine developed by Jinan Schmidt are suitable for the pressure test and flow test of seasonal nozzle metal bribe, room nozzle spiral nozzle, ceramic nozzle and other test pressure of 0-8 mpa (requiring higher pressure can be customized), and the test pressure and test flow are adjustable. It is suitable for factory testing of ...

• March 28, 2023

Now many factories will use some equipment to make the production of products more efficient and fast. When it comes to equipment, we have to mention a very important one, that is the fine assembly line. It can be seen in the upper part of the production line in almost every industry, but how to better maintain the assembly line in our daily life? Let it can work better for us. The following is ab...

• March 15, 2023

The stainless steel punching machine adopts the lever principle, the force is applied by the screw rod, the operation is convenient and labor-saving, the punching is precise, uniform and smooth, and the punching is completed in one time without secondary punching. The stainless steel punching machine is developed from ultra-high-strength steel plates, with excellent quality, long service life and ...

• March 11, 2023

Faucets are everywhere in our lives and now we use that are usually made of brass and then covered with other metals. Workers melt the brass into a pot and heat it up to 2,000 degrees Celsius. Before the construction starts, the sand core model needs to be put into a steel mold larger than him, and when everything is ready, the filling process can be entered. The cast machine places the steel mold...

• March 02, 2023

Use on the hardware’s surface of copper, stainless steel, aluminum, zinc and other materials to grind and polish. By changing abrasive belts with different width and particle size according to the work piece’s toughness and smoothness, you can process your work piece quickly and precisely. It can also use with rubber wheel, cloth wheel and grinding wheel. Low working noise and power demand, easy a...

• February 24, 2023

The first periodic calibration mold position In the long-term use process, CNC automatic punching machine mold position will Slight changes occur, which in the case of accurate punching materials will result in punching Precision decrease, affect the appearance. Therefore, the mold should be corrected and checked regularly Whether the mold is shifted, and whether it is loose should be checked. Reg...