• November 30, 2020

To cast a metal means to shape it by melting it then pouring it into a mold. As the metal cools and solidifies, it adopts the shape of the mold that surrounds it, and once it is completely cool it can be withdrawn. When they want to make cast aluminum products, manufacturers can choose between several methods. One of these is called die casting. In die casting, the manufacturer melts the aluminum ...

• March 17, 2021

The core shooter uses coated sand to make the core, which is suitable for both hot core boxes and cold core boxes. The core shooting machine is characterized by the use of two guide posts to open and close the mold vertically, and install two different molds at the same time. The fixed mold can be installed on both sides of the middle fixed frame, and the mold can be opened and closed (equivalent ...

• April 09, 2021

Gravity casting refers to the process of injecting molten metal into a mold under the action of the earth's gravity, also known as casting. The generalized gravity casting includes sand casting, metal casting, investment casting, lost foam casting, mud casting, etc.; the narrow gravity casting specifically refers to metal casting. The molten metal is generally poured into the gate manually, and th...

• July 20, 2021

The valve body is one of the main parts of the valve; there are different mechanical manufacturing methods according to the pressure level. For example: casting, forging, etc. The definition of "valve" is a device used to control the direction, pressure, and flow of fluid in a fluid system. A valve is a device that allows the medium (liquid, gas, powder) in the piping and equipment to flow or stop...

• August 24, 2021

SS304 is better. There are several reasons below that: 1.The hardness of stainless steel faucet is higher than that of all-copper. The service life of stainless steel faucet is longer than that of all-copper faucet. It does not need to change the faucet frequently, which is more environmentally friendly. 2.Stainless steel faucets do not contain lead, are resistant to acid and alkali, and are not e...

• September 27, 2021

Daily maintenance 1、Check the air cylinders, gas circuits and valves for leaks and eliminate them in time. 2、Clean the contact surfaces of moving parts at any time during work and add lubricating oil, such as guide sleeves and guide posts everywhere. 3、Lubricating oil filling cycle for the sliding sleeve and the lifting sliding sleeve of the box: every shift/time. 4、Frequently check whether the fa...

• October 11, 2021

Automatic Core Shooter Machine(conveyor belt. Protective cover) is a vertical parting, automatic, downward turning mold, conveyor belt conveying sand core, high environmental protection hot core box core shooting machine, it is suitable for valves, faucets, hardware The requirements of multiple types of sand cores for small and medium-sized work pieces in the parts, hydraulic and pneumatic industr...

• October 26, 2021

The automatic single-head core shooter (dry and wet sand, automatic core connection) is a horizontally divided, fully automatic operation hot core box core making equipment. It is suitable for the production of sand cores less than 3.5kg. Its principle is to inject the core sand mixture into the heated mold core box, and then take it out after hardening to a certain thickness, so as to obtain high...