blog

Faucet assembly-single hole basin faucet assembly

  • 2021-06-30 17:06:54

When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. Most of the water in the market belongs to the hard pipe, so you should pay attention to the height of the upper spout. It is most suitable to go down from the basin to 35 work points. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold water pipes out of the wall. When you find that there is a distance between the angle valve and the water pipe on the faucet, buy a special extension pipe to connect it. Remember, you must not use other water pipes to connect, because if the water pressure is high, it will easily fall off and leak water, causing you loss. If the inlet pipe is too long to exceed the outlet pipe, the part can be cut off according to your needs. If the angle is not suitable, it can be bent to the position you need.

——————————

D&S Automatic Co.,Ltd. ,is a professional faucet assemble machine company. In addition, We also supply you modern facilities, such as valve, brass fitting, cartridge, brass fittings, teflon tape and all kinds of machines. Our major service are manufacturing, sourcing, production, sales and service which includes engineer training in your factory.

D&S Automatic Co.,Ltd. located at the China plumbing town of Fujian Nan'an,It is a professional machine company. We supply you modern facilities,such as faucet, valve, brass fitting, cartridge, brass fittings, teflon tape and all kinds of machines. 

Copyright © 2021 D&S Automatic Co.,Ltd.. All Rights Reserved.

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #