Emery belt sander can be divided into desktop belt machine, vertical belt machine, hand push belt machine, dust removal belt machine and so on. A belt grinder, a working instrument, includes an abrasive belt, an abrasive belt housing for accommodating the abrasive belt, a motor, a motor housing for accommodating the motor, a handle, a driving wheel, a driven wheel, and a transmission connecting the motor and the driving wheel . A belt sander, including an abrasive belt, an abrasive belt housing for accommodating the abrasive belt, a motor, a motor housing for accommodating the motor, a handle, a driving wheel, a driven wheel, and a transmission connecting the motor and the driving wheel, the motor housing It is integrally connected with the handle to form a unit body, and a connecting device connects the unit body to the abrasive belt housing. The above-mentioned unit body can be rotated around the axis of its abrasive belt, so that the belt sander can be located in a comfortable operating position, which can reduce the operator's long-term work fatigue.
1. Before starting the sander, first check whether the wheel disc and belt cover are complete and firm, and whether the sandpaper is damaged. It can be turned on after checking, and can be used after the speed is stable.
2. When grinding, the workpiece should be held firmly, and at the same time, people should stand on the side of the equipment to work, and try to avoid the rotating surface of the abrasive belt.
3. When grinding, the workpiece should be clamped firmly, and the workpiece should be in contact with the sandpaper slowly. Not too fast or too hard, should be evenly ground.
4. The sandpaper should be tightened firmly when it is installed, and the object must be clamped with pliers when grinding, and it should not be directly ground by hand.
5. It cannot work on the roulette with large vibration.
6. After the sand machine is used, the power should be turned off immediately.
Choose D&S Automatic Co.,Ltd we provide best quality emery belt machine for you.