• September 13, 2022

There are 4 types of fire sprinklers: pendant sprinklers, upright sprinklers, ordinary sprinklers, and sidewall sprinklers. Among them, the pendant nozzle is the most widely used one. 1. Pendent nozzle The pendant type sprinkler is the most widely used type of sprinkler. It is installed on the water supply branch pipe. The shape of the sprinkler is parabolic, and 80-100% of the total water is spra...

• September 06, 2022

The slotting machine is mainly used for asphalt and cement pavement repair, drainage water pipes, gas pipes, electric wire pipes and optical cable pipes. The pavement is quickly cut into uniform grooves by the roulette saw to form new joint surfaces. Optimize the contact level between the filling material and the slot, and strengthen the tightness of the bonding between the filling material and th...

• August 29, 2022

The working principle of winding packaging machine: it is to place the wound object in the center of the rotary table, start the rotary table motor to rotate, and naturally drive the rotary table to rotate, so that the object to realize the peripheral winding film machine. At the same time the lift motor is also started, winding machine to drive the winding strapping machine whole assembly to do u...

• August 22, 2022

Glass cutting machine refers to a processing machine specially used for glass processing and blanking. The glass cutting machine includes the air-floating arrangement feeding table at the beginning and the end, and the double-overpass cutting table. The first straight beam of the table and the direction of the straight beam and the length of the lower frame of the first straight beam and the fourt...

• August 15, 2022

Rotary Polisher Scope of use: The high-precision traction precision grinding and polishing machine is suitable for grinding and polishing of high-end precision workpieces such as watches, watch cases, medical equipment, and jewelry. Through the combination of different chucks, abrasive tools and processes, it is widely used in high-precision grinding and polishing of tool edge passivation, wire dr...

• August 08, 2022

A lapping machine is a grinding machine that grinds the surface of a workpiece with a grinding tool coated or embedded with abrasives. It is mainly used for grinding high-precision planes, inner and outer cylindrical surfaces, conical surfaces, spherical surfaces, threaded surfaces and other surfaces in workpieces. The main types of grinders are disc grinders, rotary shaft grinders and various spe...

• August 01, 2022

Aluminum alloy gravity casting has low melting point and good casting performance, and is widely used in automobiles, motorcycles, motors, communications, hardware tools and other fields. Aluminum alloy has a low melting point and good casting performance. Gravity castings and low-pressure casting products are widely used in automobiles, motorcycles, motors, communications, hardware tools and othe...

• July 25, 2022

1. Install a 6-station tool holder, and the center height should be appropriate. (What kind of detection element is the 4-station tool holder, and the 6-station tool holder is also the kind of detection element, so there is no need to change the ladder diagram too much). 2. Connect the wires according to the wiring diagram. (The signals of the fifth and sixth stations should be connected to the in...

• July 19, 2022

Low pressure casting machine is a general equipment for low pressure casting of aluminum alloy, which can be widely used in the production of aluminum alloy castings in automobiles, motorcycles, instruments, textile machinery and aerospace industries. The low pressure casting machine is composed of main engine, hydraulic system, molten pool type holding furnace, liquid level pressurizing device, e...