• September 28, 2023

Functional characteristics : 1、The workpiece is clamped and formed in one step, and servo feed is used to complete the entire process to improve product stability and accuracy. 2、This machine tool adopts a twelve-axis power turret head and a high-precision ball and line roller combination. It can mill, drill, ream, and tap at the same time, completing multiple sets of processes to improve producti...

• October 09, 2023

The working principle of CNC machine tools is: the computer in the CNC device performs a series of processing on the information recorded in the form of numerical and character encoding through the input device, and then executes the machine tool spindle and feed through the servo system and programmable controller. The mechanism issues instructions, and the machine tool body follows these instruc...

• October 18, 2023

Milling machine refers to a gantry milling machine that mainly uses milling cutters to process various surfaces on workpieces. Usually the rotational motion of the milling cutter is the main motion, and the motion of the workpiece (and) the milling cutter is the feed motion. Boring machine gantry milling machine, milling and boring machine and boring machine are one of them. Boring machines can al...

• November 29, 2023

1. There are few pores inside the casting, and the rigidity of the product after heat treatment can be greatly improved, even exceeding that of die-casting products. 2. The product has low density. Relying on liquid self-gravity molding, the density of low-pressure casting machine products is lower than that of die casting, and its strength is also slightly lower, but its elongation is higher. 3. ...

• January 19, 2024

Machining centers are unable to process small molds with small tools, and the cost is high. The advantage of the engraving machine is engraving, but if the hardness of the processed material is relatively high, it will be unable to do its job. The emergence of engraving and milling machines can be said to be the shortcomings of both.  The machining center can realize the centralized processin...

• March 29, 2024

The reason why the slitting machine's winding always goes off track: 1. Problem of equipment deviation 2. Air leakage occurs in parts of the reel 3. Is the pressure at both ends of the reel consistent? What cannot be ignored during production is to pay attention to changes in product tension, etc. Slitting machine is a mechanical equipment that cuts wide-width paper, mica tape or film into multipl...