• October 09, 2020

Machining is manufacturing process that involves removing materials using cutting tools for getting rid of the unwanted materials from some workpiece and converting it into the shape you desire. A large piece of stock is used for cutting the workpiece. The large stock might be in any shape such as solid bar, flat sheet, beam or even hollow tubes. The process can also be performed on some existing ...

• November 24, 2020

A Ball Valve is a quarter turn valve which can be opened or closed by applying pressure on the hollow and pivoting ball inserted into void opening. It is usually used as a switch that can control and direct the flow of fluids (including air, water, gas, oil etc.). When the hole in the ball is aligned to the flow, it is open and closed when it is perpendicular. Automatic brass ball machine carries ...

• November 30, 2020

To cast a metal means to shape it by melting it then pouring it into a mold. As the metal cools and solidifies, it adopts the shape of the mold that surrounds it, and once it is completely cool it can be withdrawn. When they want to make cast aluminum products, manufacturers can choose between several methods. One of these is called die casting. In die casting, the manufacturer melts the aluminum ...

• January 06, 2021

Drilling machines and tapping machines are made with a variety of specifications and function in several ways. In modern drilling and tapping machines, the surface to be drilled is either kept on a drill press table or a drill press vise. For drilling in a round shaft, a drill press vise is used while a drill press table is used for a shaft with a planar base. The speed of drills can be 5 to 6 m/m...

• April 09, 2021

Gravity casting refers to the process of injecting molten metal into a mold under the action of the earth's gravity, also known as casting. The generalized gravity casting includes sand casting, metal casting, investment casting, lost foam casting, mud casting, etc.; the narrow gravity casting specifically refers to metal casting. The molten metal is generally poured into the gate manually, and th...

• June 30, 2021

When buying a single-handle basin faucet, you should pay attention to the diameter of the spout. Most of the water in the market belongs to the hard pipe, so you should pay attention to the height of the upper spout. It is most suitable to go down from the basin to 35 work points. During installation, a special angle valve must be selected, and the angle valve must be fixed to the hot and cold wat...

• July 20, 2021

The valve body is one of the main parts of the valve; there are different mechanical manufacturing methods according to the pressure level. For example: casting, forging, etc. The definition of "valve" is a device used to control the direction, pressure, and flow of fluid in a fluid system. A valve is a device that allows the medium (liquid, gas, powder) in the piping and equipment to flow or stop...

• August 24, 2021

SS304 is better. There are several reasons below that: 1.The hardness of stainless steel faucet is higher than that of all-copper. The service life of stainless steel faucet is longer than that of all-copper faucet. It does not need to change the faucet frequently, which is more environmentally friendly. 2.Stainless steel faucets do not contain lead, are resistant to acid and alkali, and are not e...