How to use the brass processing machine?

  • 2023-02-02 11:10:47
1. Operators should operate in accordance with the operating instructions of the copper bar processing machine, and must not violate regulations to cause damage or damage to personnel and equipment. The molds and accessories of the copper bar processing machine should be kept in good condition. Familiar with the structure, performance and operation method of the machine.
2. The installation, debugging or disassembly of molds should be carried out by personnel familiar with the machine in accordance with the prescribed procedures. When the machine is running, never put your hand or part of your body between the upper and lower molds to avoid accidents.

3. Regularly check the sharpness of the cutting edge of the blade and die. If the cutting edge is found to be blunt, it should be sharpened or replaced in time. Keep the oil clean and the oil passage of the machine unobstructed, and add lubricating oil to the moving parts of each unit every shift. Be sure to ensure flexible movements and correct positions of electrical and hydraulic components, and stop and check immediately if abnormal phenomena are found. When not working, turn off the working buttons of each unit, and turn off the power switch on the operation panel.

Choose D & S Faucets, we will provide you with the best service.

D&S Automatic Co.,Ltd. located at the China plumbing town of Fujian Nan'an,It is a professional machine company. We supply you modern facilities,such as faucet, valve, brass fitting, cartridge, brass fittings, teflon tape and all kinds of machines. 

Copyright © 2024 D&S Automatic Co.,Ltd.. All Rights Reserved.

IPv6 network supported


Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #